A-Series: Angular Downspout Boot
 

 

Related Products

 
 
Angular Overview

The J.R. Hoe A-Series downspout boot is recommended for both ground level discharge as well as below grade drainage pipe connections. The A-Series downspout boots feature a 45 degree transition to direct flow away from the building and into the drainage system or onto the ground. A fastening lug slot allows for easy installation to the building wall. The A-Series downspout boots feature a distinctive contoured design that is engineered for superior hydraulic conveyance, aesthetic appeal and durability.

Downloads

      

   

Product Info
  • Available in hundreds of different sizes - view our Size Chart
  • Custom or non-standard downspout boots can be designed to meet special requirements or specifications
  • Various coating options options are available including primer coat and powder coat in a wide range of colors
  • Qualified for LEED Credits 4.1/4.2 Recycled Content and LEED Credits 5.1/5.2 Regional Materials
  • For additional information or questions please contact us
 

Drawing Selector

Please choose from the drop down menus provided below to select the correct product drawing or select get a quote.

{{field.label}}

Quantity

{{ProductNumber}}

{{options.coating}} mounting {{options.pipe_size}}" {{options.pipe_material}} coupling

Your Product

Product Preview

Additional drawings available upon request.

 

 

Frequently Asked Questions

What distinguishes the A-Series angular downspout boot?
The A-Series features a 45 degree transition at the outlet that directs water away from the building. It is the most versatile of the three styles because it is recommended for both ground level discharge, such as onto a splash block, and for below grade connections to a drainage pipe set at an angle away from the wall.

 

When is an Angular boot the right choice over an Offset boot?
Choose the A-Series when the receiving pipe is positioned farther from the building than a 2 inch offset can reach, when the underground pipe approaches at roughly 45 degrees, or when the downspout discharges at grade and the flow simply needs to be directed away from the foundation. The 45 degree geometry provides working clearance from the foundation for excavation and pipe connection.

 

Can the A-Series discharge onto a splash block instead of connecting to a pipe?
Yes. The 45 degree outlet is designed to direct water away from the building either into a drainage system or onto the ground, so it works well with a splash block where no underground storm connection exists. This makes it a practical retrofit option on buildings without piped storm drainage.

 

Does the A-Series include a cleanout option?
Yes. Many A-Series models are available with an integral cleanout plug, designated with a C suffix such as A-4528C. The cleanout gives maintenance staff direct rodding access at the base of the downspout where debris most often accumulates.

 

What material and specification apply to the A-Series?
A-Series boots are cast from ASTM A48 Class 30B gray iron, providing impact resistance and wear resistance for exposed, trafficked locations. A downloadable general specification for the A-Series is provided on the product page for incorporation into project specifications.

 

How is the A-Series mounted to the wall?
A fastening lug slot on the boot accepts anchor hardware into concrete, masonry, or brick. Stainless steel hex bolts with flat washers and drive-in double expansion shields are offered, along with theft-resistant penta-head bolts and neoprene wall spacers for alignment.

 

What sizes are offered in the A-Series?
The A-Series is available in hundreds of size combinations, with lengths from 16 to 80 inches and top bells sized for virtually all standard commercial downspout profiles, including round downspouts. Consult the published size chart for inside bell dimensions and outlet spigot diameters.

 

How does the A-Series connect to the underground pipe?
The 45 degree spigot outlet is typically joined to the receiving pipe with a Fernco style flexible coupling tightened with stainless steel band clamps, or with a hub fitting sized to the spigot outside diameter. The angled geometry gives the installer clearance from the foundation to make the joint.

 

What finishes are available for the A-Series?
A-Series boots may be supplied bare, with a rust-inhibitive primer for field painting, or factory powder coated from a standard palette of nearly 200 colors. Bare iron develops a maintenance-free natural patina over time.

 

Where do I get A-Series drawings and specs for my drawing set?
The DWG Selector tool on the website produces the correct A-Series drawing based on your selected bell size, length, coating, mounting, and coupling options. The A-Series general specification and the master size chart are downloadable directly from the product page.