Downspout Boot Accessories
 
Mounting Hardware

The following hardware options are offered for mounting downspout boots onto concrete, masonry or brick building walls:

½-13 x 2-3/4” Stainless Steel hex bolt w/ flat washer provided with drive-in SS double expansion shield

Or, for Theft-Proof installations:

½-13 x 2-3/4” Stainless Steel penta-head bolts w/ flat washer and SS expansion shield per above (installation tool provided)

 
 
Wall Spacers

Neoprene wall spacers allow the cast iron downspout boot to be moved out from the wall anywhere from 1” to several inches. This is beneficial in some cases to assist with lining up the downspout boot with either the downspout or the underground drainage pipe, or both.

 

Drawing Selector

Please choose from the drop down menus provided below to select the correct product drawing or select get a quote.

{{field.label}}

Quantity

{{ProductNumber}}

{{options.coating}} mounting {{options.pipe_size}}" {{options.pipe_material}} coupling

Your Product

Product Preview

Additional drawings available upon request.

 

 

Frequently Asked Questions

What mounting hardware is supplied for attaching boots to the wall?
J.R. Hoe offers 1/2-13 x 2-3/4 inch stainless steel hex bolts with flat washers, paired with drive-in stainless steel double expansion shields for anchoring into concrete, masonry, or brick building walls. The hardware is matched to the boot's fastening lug slots.

 

Is there a vandal resistant or theft proof mounting option?
Yes. For theft proof installations, 1/2-13 x 2-3/4 inch stainless steel penta-head bolts with flat washers and stainless expansion shields are offered, and the special penta installation tool is provided. Penta heads cannot be removed with common hex or socket tools, which protects boots in public and unsupervised areas.

 

What are neoprene wall spacers and when do I need them?
Neoprene wall spacers let the cast iron boot be positioned off the wall anywhere from 1 inch to several inches. They are used to line up the boot with the downspout above, the underground drainage pipe below, or both, when the wall face, downspout, and pipe are not perfectly aligned.

 

Can wall spacers solve a downspout that stands off the wall on brackets?
Yes. If the sheet metal downspout is held off the wall by straps or furring, stacking neoprene spacers behind the boot's mounting lugs brings the top bell out to meet the downspout while keeping the anchors solidly engaged in the wall.

 

Why is stainless steel used for the mounting hardware?
The base of a downspout is a wet, splash prone location, and dissimilar or coated carbon hardware would corrode and streak the wall over time. Stainless bolts, washers, and expansion shields resist corrosion for the life of the installation and preserve the clean appearance of the assembly.

 

What is a cleanout plug and should I specify one?
Many boot models are offered with an integral cleanout plug on the body, indicated by a C in the model number. The cleanout provides direct rodding access for clearing debris from the boot and the downstream pipe, and it can eliminate a bulky T-branch or separate in-ground cleanout, which saves space at busy entrances.

 

How do the expansion shields install in masonry?
The stainless steel double expansion shields are a drive-in type: the installer drills the hole at each lug slot location, drives the shield in, sets the boot, and torques the hex or penta bolt with its flat washer through the 3/4 inch lug slot. No epoxy or cure time is required, so the boot is loaded immediately.

 

Is mounting hardware included with the boot or ordered separately?
Mounting hardware, spacers, and cleanout options are selected when the boot is ordered, so confirm them on your purchase order or quote request. Calling out the hardware package in the specification prevents field substitution with lesser anchors.

 

What accessory considerations apply in high traffic public areas?
For schools, parks, transit areas, and storefronts, pair the cast iron boot with the penta-head theft proof hardware and consider the cleanout plug for maintenance access. The combination produces an assembly that resists both impact and tampering with minimal upkeep.

 

Do accessories work across all three boot series?
Yes. The mounting hardware, theft proof bolts, wall spacers, and cleanout plug options apply across the O, A, and N series, and equivalent provisions can be engineered into custom and fabricated boots. Specify the accessories with the boot model for a coordinated package.